release agent
英 [rɪˈliːs ˈeɪdʒənt]
美 [rɪˈliːs ˈeɪdʒənt]
网络 脱模剂; 脱膜剂; 隔离剂; 释放剂; 剥离剂
双语例句
- Technology advances-such as Henkel's semi-permanent release agent which dries in just one minute-give teams the ability to make improvements to the car much more quickly.
技术上的进步例如汉高的半永久隔离剂1分钟就会干透使车队能够更快地对赛车进行改造。 - Release agent market is currently a bit confusing, mixed, the product broadly divided into several broad categories: mineral oil, emulsified oil, water type, polymer type.
目前脱模剂市场比较混乱，良莠不齐，产品大致分几大类：矿物油类、乳化油类、水质类、聚合物类。 - Application of Release Agent and Creping Adhesive Agent in BF 12 Tissue Paper Machine
BF12卫生纸机剥离剂和黏合剂的应用 - This product is also an excellent release agent, extremely suits the plastic processing industry.
本产品同时也是优良的离型剂，非常适合运用在塑料加工业。 - Our company specializes in production and operation for the hot curing FRP release agent within the liquid.
本公司专业生产经营用于玻璃钢热固化的液体内脱模剂。 - The mutual interaction among the lipid surfactant, polymethyl methacrylate, and inorganic solid particles in packaging thermal transfer process release agent was studied by measurement of centrifuge.
讨论了交联剂、剥离剂对色粉软化点、熔体指数、粘流温度的影响；对着色剂对色粉荷电性能的影响及与树脂分子间的作用进行了分析。 - First of all, the irrational use of release agent is a concrete structure caused by hardening the surface of the main reasons for cellular surface Ma.
首先，不合理使用脱模剂是造成硬化混凝土结构表面蜂窝麻面的主要原因。 - Fat of animal and vegetable oils for the release agent problems are more due to air-containing products of more emulsifier and thickener, surface concrete structure will be greatly affected.
动植物油进行脂化的脱模剂出现的问题较多，其原因是产品中含有引气性比较大的乳化剂及增稠剂，会给混凝土结构面层带来极大的影响。 - Contains a mold release agent.
包含脱模剂。 - It is widely used for insulation, lubrication, anti-shock, anti-dust oil, dielectric liquor, heat carrier, defoamer, release agent, paint and additive in daily chemicals.
广泛用作绝缘润滑、防震、防尘油、介电液和热载体，以及用作消泡、脱模剂、油漆及日化品添加剂。 - The influence factors on surface curing time of silicone rubber release agent vulcanized at room temperature were analyzed by experiments.
通过实验分析了影响室温硫化硅橡胶脱模剂表面固化时间的各种因素。 - The Present Situation of the Research Work and Application of Solventless Silicone Release Agent
无溶剂硅酮隔离剂的研究状况及应用 - We can adjust these factors to produce different drug controlled release agent.
可以通过调节这些因素来制备释放时间不同的药物缓释剂。 - The nitrogen availability increases 13% by using the nitrogen release agent.
通过氮素缓释剂的使用，氮素利用率提高13%。 - A silicone oil release agent was prepared from DMC, MM etc..
采用DMC、MM等制备硅油脱模剂。 - Selection of release agent and application of emulsion type release agent
剥离剂的选择及乳液型剥离剂的应用 - On the application of release agent in concrete maintenance
浅谈混凝土养护中脱模剂的应用 - In this paper, the release agent of RTV silicone which was composed of solvent, silicone rubber, coupling agent and catalyst was explained.
本文对溶剂型有机硅隔离剂的溶剂与硅橡胶，偶联剂和催化剂等进行了论述。 - Synthesis and Application of emulsion type release agent
乳液型隔离剂的合成与应用 - To avoid interference, compounds containing Br or I can be used as mould release agent.
为避免对于测定元素的干扰，可分别选用溴或碘的化合物作为脱模剂。 - This paper introduces Selection and types of release agent difference between emulsion and solvent type, and use range of emulsion release agent.
本文介绍了剥离剂的选择要求，类型和乳液型剥离剂与溶剂型剥离剂在使用和性能上的差别以及乳液型剥离剂的使用范围等。 - The effect of the viscosity, the content, the kind of diluent of anchorage agent on the properties of silicone release agent of solvent type was compared.
比较了几种锚定剂的粘度、用量、稀释剂种类等对溶剂型有机硅隔离剂基本性能的影响。 - The present situation of the research work, coating technology and application of additive solventless silicone release agent in recent years are described in this paper.
本文介绍了近年来加成型无溶剂硅酮隔离剂的研究状况、涂布工艺及应用。 - The preparation of the release agent which is used in composites metalizing by transfer and its application are studied in this paper.
主要研究了复合材料转移法金属化所用脱模剂的制备及应用。 - Effect of Anchorage Agent on Properties of Silicone Release Agent
锚定剂对有机硅隔离剂性能的影响 - A kind of water-soluble mould release agent that contained lecithin was prepared, this mould release agent had good mould releasing performance, rust preventing ability and emulsification stability, it had no poisonous material and was a kind of environmental friendly mould release agent.
制备了一种含卵磷脂的水溶性脱模剂，该脱模剂具有良好的脱模性、防锈性和乳化稳定性，并且不含有毒有害物质，是一种环境友好的脱模剂。 - It can manage multi-web pages through release agent and message middleware.
采用发布代理和消息中间件，能实现对于多个站点基于模板的静态网页发布。 - In this paper, the preparation process of organic silicon release agent was explored.
本文旨在对有机硅脱模剂制备工艺进行探索，为后续研究提供有益的参考。 - Applicable to selected Molded LDPE foam formula is superior to the fluoride release agent emulsion silicone release agent, mold release properties of the part release agent approach or exceed the fluoride release agent GU-2080.
筛选出了适用于LDPE发泡成型制品的氟脱模剂配方优于乳化硅油脱模剂，脱模剂的部分脱模性能接近或超过了GU&2080氟脱模剂。 - Pesticide microcapsule release agent is always a hot topic in green pesticide formulations research in recent years.
农药微胶囊缓释剂近几年来是绿色农药剂型研究的热点之一。